Here are some photos of the new Harbor Lock which went into production at Harbor Truck Bodies on all bodies effective June 5, 2007. This lock is standard equipment on all of Harbor's products. When unlocked the lock pops out and exposed a red band to allow you to see if your boxes are unlocked from over 50' away. The best part is that to lock the lock, you no longer need the key--you just push the button in--and its locked! The optional MasterLock System uses this same type lock and there is no longer a bar in the back, just the push button lock. How clean is that?
Lock Button is out when unlocked and shows red ring for visibility
Lock Button is out when unlocked and shows red ring for visibility
Locks in unlocked position
New MasterLock without bar in unlocked position
New MasterLock without bar in locked position
Transverse Compartments
Sometimes you have certain size items that require more depth and the transverse compartment can help solve the problem. It is usually in the front compartment. The two most common types are full front compartment that extends through to the other side of the body so that when you open doors on both sides, you can see all the way through. The second most common type is where the compartment just goes across the bed to the back of the other compartment, but does not go all the way through. Another type is 50/50 so there is a wall in the middle of the bed, but you get dramatically more depth on both front compartments. Then there are custom sizes for specific tools, etc. Below are some examples of transverse compartments. More photos will be added as they become available.
Example of a 50/50 Transverse Compartment w/Solid Shelf at Floor Level
Example of Custom Sized Transverse Through Compartment
Example of Custom Sized Transverse Through Compartment
Example of Custom Sized Transverse Through Compartment
Bed View Example of Custom Sized Transverse Through Compartment
Closeup Bed View Example of Custom Sized Transverse Through Compartment
Bling! Bling!
Here is an example to really dress up and at the same time offer protection to the inside spaces of your Service Body or Combo Body. Treadbrite Backwapper (the inside sides of the body) and Bulkhead Package is a great way to get some Bling! It is especially awesome on colored bodies.
Job Box For Service Body or Other Body
Stainless Steel Vise Bracket (Removable) and HD Pipe Holder (Front Panel in conjunction with Vise Bracket)
Stainless Steel Bracket Side View
Stainless Steel Vise Bracket Rear View
Stainless Steel Vise Bracket Underside View
Stainless Steel Vise Bracket Upper View
Pipe Holder (MPIPE) Stowed
Pipe Holder (MPIPE) Opened
Customer example of Vise Bracket w/Vise Mounted
Roll Out HD Drawers
HD Roll Out Ball Bearing Drawers are available in 3" and 5" depths. They are available to be mounted in any compartments that we make; however, they are most utilized in the front compartment and in the Contractor Body compartment. They lock tightly so they do not move in transit. They are designed to last the life of the truck body.
Full Compartment of Drawers. 3-3" and 2-5"
Drawer Detail
Full Compartment of Drawers. 3-3" and 2-5"
Full Compartment of Drawers. 3-3" and 2-5"
HD Drawer Latch Detail
Contractor Compartment (Or Horizontal Compartment on Service Body)
Contractor Compartment (Or Horizontal Compartment on Service Body)
Contractor Compartment (Or Horizontal Compartment on Service Body)
In Floor Tie Downs Example
Rear 18" Work Platform
This is our 18" Work Platform. It is available on any Service Body and promotes a great little work area for work on the job site. It is available with or witout small compartments with doors on the sides. It is a relatively inexpensive way to add some great workspace for those who need to use the truck at the job site. Instead of the fold-down rear gate, there is a drop in gate instead.
18" Rear Work Platform can be added to any service type body. This one shown on a Welder body
Spare Tire Mount
Here are some shots of a popular spare tire mount for those bodies where there is no spare tire carrier from the factory. It is mounted such that it takes up very little space in the service body and is directly behind the driver so does not obstruct visibility.